PPS Insulator Female ZGG Circular Metal Receptacle 2B 16 pin PCB
Fixed Socket
Quick details of 2B 16 pin PCB fixed socket:
1. 360°screening for full EMC shielding
2. High packing density for space savings
3. Multipole from 2 to 32pin contacts available
4. Security of the push-pull self-latching system
5. 100% compatible with original connectors
6. Key option: 1 key(G) & 2 key with different
degree:30°,45°,60°,90°,...145°
Technical Characteristics of 2B 16 pin PCB fixed socket:
| Temperature Range | -45° C~+125° C | Resistance to vibrations | 15 g [10 Hz - 2000 Hz] |
| Shell Material | Brass with chrome plated | Humidity | up to 95% at 60° C/140F |
| Shock Resistance | 100 g [ 6 ms] | Salt spray corrosion test | >48hr |
| Rated current | 6A | Test voltage(contact to contact) | 0.95 kV rms |
| IP Rating | IP50 | Endurance(shell) | 5000 mating cycles |
Applications of 2B 16 pin PCB fixed socket:
1. extreme: weatherproof applications
2. medical: disposable equipment
3. instrumentation: test&measurement, vacuum
4. defense&security: communication systems, target acquisition
5. transport: automotive, railways
6. energy: renewable energies, batteries, fuel cells
Advantage of 2B 16 pin PCB fixed socket:
1.100% high quality, all bad products get free warranty within one
month after received.
2. Special feature and service can be provided according customer’s
requirement.
3. Accept three years warranty upon customer requirement.
4. Repairs parts are available within three years.
5. Unique designed package for you can be provided according
customer’s requirement.
Cable assembly process :
1. Pass the cable through the sheath, the tail nut, and the cable
clamp in turn, and weld it to the insulator assembly in accordance
with the order.
2. Install the two-piece insulator clasp onto the welded insulator
assembly, noting that the window on the clasp corresponds to the
protrusion on the insulator assembly.
3. Install the cable clamp to the appropriate position of the
cable, noting that the protrusions on the cable clamp correspond to
the grooves on the insulator clasp.
4. Push the insulator assembly, insulator clasp and cable clamp
into the plug assembly in turn, paying attention to the protrusion
on the insulator clasp ring and the gap in the plug assembly.
5. Tighten the tail nut to the plug assembly.
6. Put the jacket on the corresponding step of the tail nut.
